Full Half-Bridge (H Bridge) Drivers SIC645ALR-T1-GE3 Product Introduction

Introducing the SIC645ALR-T1-GE3 IC Half Bridge Driver Power MLP55 dash 32 from Vishay Siliconix. This active device is part of the VRPower Series and is ideal for synchronous buck converters and voltage regulators. It features a Half Bridge output configuration, PWM interface, and inductive load type. With NMOS technology and a typical Rds On of zero point seven six mOhm for LS and three point six mOhm for HS, it operates with a supply voltage of four point seven five to five point two five Volts and a load voltage of four point five to eighteen Volts. The device has a surface mount mounting type and offers fault protection such as current limiting and over temperature. Perfect for demanding environments with an operating temperature range of negative ten to one hundred degrees Celsius.

源：DiGi Electronics

發佈時間：2025-07-31

影片推薦

MLX90340SDC-AAA-100-SP Product Introduction

Introducing the MLX90340SDC-AAA-100-SP, a cutting-edge Hall Effect Sensor by Melexis Technologies NV. This active Triaxis programmable device measures linear and rotary positions continuously over zero degrees to three hundred sixty degrees, utilizing an external magnet. Featuring analog voltage and PWM output signals, it ensures precise linearity of plus minus one degree. Designed for surface mount with gull wing terminations, it operates between negative twenty degrees Celsius to eighty-five degrees Celsius. Compliant with ROHS3 standards and unaffected by REACH, it guarantees reliable performance within a moisture sensitivity level of three.

DiGi Electronics 2025-07-31

24FC01T-E/OT Product Introduction

Introducing the 24FC01T dash E slash OT from Microchip Technology. This IC EEPROM one KBIT I2C one MHz SOT23 dash five offers reliable non-volatile memory performance. It features one KBIT EEPROM technology with a memory organization of one hundred twenty-eight by eight and an I2C memory interface. With a clock frequency of one MHz and an access time of four hundred fifty ns, it is ideal for high-speed data storage. It operates at a voltage range of one point seven volts to five point five volts and supports temperatures from minus forty degrees Celsius to a hundred and twenty-five degrees Celsius. This surface mount device is ROHS three compliant and has unlimited moisture sensitivity level.

DiGi Electronics 2025-07-31

C0603X758D8HACAUTO Product Introduction

Introducing the KEMET ceramic capacitor. Manufacturer product number is C0603X758D8HACAUTO. 0 point 75 picofarads ultra small capacitor offers a tolerance of plus minus 0 point 5 picofarads. Rated for ten volts, it features a temperature coefficient of X8R. Withstanding temperatures from negative 55 degrees Celsius to 150 degrees Celsius, it is ideal for automotive applications. Designed with low equivalent series inductance, soft termination, and high temperature tolerance. This surface mount capacitor in size 0603 also meets AEC-Q200 ratings and is ROHS3 compliant.

DiGi Electronics 2025-07-31

C0603C221J5GACAUTO Product Introduction

Introducing the Kemet capacitor, model number C0603C221J5GACAUTO. This surface mount ceramic capacitor offers a capacitance of two hundred twenty picofarads with a tolerance of plus minus five percent. Rated at fifty volts, this component features the reliable C zero G, NP zero temperature coefficient. Designed for automotive applications and compliant with A E C- Q two hundred standards, it operates efficiently in temperatures ranging from negative fifty-five degrees Celsius to one hundred twenty-five degrees Celsius. Its size is zero point zero six three inches by zero point zero three one inches and it boasts low E S L properties. RoHS three compliant with a moisture sensitivity level of one. Perfect for your automotive electronic needs.

DiGi Electronics 2025-07-31